Jetting Tanker

Measurements
Volume:
8000 L
Lenght:
Width:
Height:
Available Capacities: 8000 | 10000 litre
Power Transmission Total PTO shaft with two sections, placed between gearbox and differential gear to ensure drive for high-pressure water pump. The power to the hose reel etc is provided by means of one of the side power take off outputs which operates a hydraulic pump. An oil tank of suitable capacity for the hydraulic system complete with filter, sight glass and valves is provided.
Tank Cylindrical, made of shell / baffle of 6 mm & dishends of 8mm of grade A36 or equi. 1 nos. manhole 20” diameter with 10” fill hatch with inbuilt vent valve.

-Bottom discharge with 4” valve.

High Pressure Water Pump – Plunger Pratissoli pump model. MW 40 or equivalent supplying 211 Lts/min at 210 Bar provided with water inlet filter with heavy duty propylene housing and washable stainless steel cartridge.

– Pressure gauge, glycerin filled.

– Safety valve.

– Device to by-pass the water from the pump backs to the water tank.

– The high-pressure water pump is mounted on a heavy duty stand on the truck side and operated directly by the total PTO by a high velocity cardan joint. Water pressure is controlled from the main panel board.

Main hose reel Main hose reel hydraulically powered, assembled on the rear complete of swivel joint, crown, chain, gear, hydraulic motor for forward and backward rotation.

– Automatic hose guide. It can pivot up to 180° degrees and be blocked into different positions. It comes complete with a high-pressure hose dia. 1″x100 Meters (Material: 2 steel banding and black rubber substracte)

– Operations of the hose reel are controlled from the main panel board.

Secondary hose reel Manual type, assembled along one side of the truck on the rear of the tank, complete with swivel joint, mechanical lock, rewind crank, high pressure ball tap for shut off, high pressure hose dia. 1/2″, length 40 meters and spray gun,

quick coupling and nozzle.

Main control panel Watertight heavy duty lockable box located at the truck rear in ergonomic position for Operator comfort, 24 Volts D.C., sealed door and window.

– Power switch.

– Engaging/releasing controls for high-pressure pumps.

Painting Surface treatment – Grit blasted to S.A.2.5 (Swedish Standard)

Internal: Suitable Epoxy coating.

External: Two coats of poxy primer

Top coat of high gloss polyurethane finish paint in

single colour. (RAL – TBA by client)

Accessories -1 nos. – pressure water gun complete with suitable nozzle.

-3 nos. – high-pressure retro nozzles.

-1 no. orange rotating beacon & 1 nos working light for night operation

-2 nos. Steel large Tool box, with hinged cover and locks on each side with standard tools (as per space availability)

-Rear bumper with platform

-Steel mudguard with mudflaps.

-1 No. Level indicator.

-Drip tray under discharge valve at rear

-GI grating walkway to access manhole.

 

Enquiry About this Product

Please fill the form below: