Cement Bulker

Measurements
Volume:
51 Cu-m
Lenght:
12800 mm
Width:
2850 mm
Height:
4450 mm
Tanker/Chassis Tanker is made of a self-supporting design, reinforced with two fabricated longitudinal beams of A36 / S275 Jr or equivalent. All other pressed steel channels / plates of Grade A36 / S275Jr or equivalent.
Shell / Cone / Ends 8mm / 6mm / 6mm plate
Manhole 4 Nos. Manhole covers of 450 mm diameter, loading through manhole.
Loading Through Top Manhole.
Outlet/Discharge 4” outlet on both sides with 4” diameter pipe and a butterfly valve at The bottom of tank with Storz-A coupling & dust cap.
Operating pressure 2 bar
Pneumatic pressure 2.6 bar
Aeration System Aeration system with aluminium strip & canvas hose for Fluidization of content & ease of discharge.
Safety equipment The bulker will be fitted with:

-Air pressure gauge

-Safety release valve

The above is fitted on aeration line.

Axle/Suspension 3 x 16 Tons Mechanical overslung suspension axle- Wide track. BPW German or as per customer request.
Tyres 12+1 nos. 1200 R 24” tyres.
Rims 12+1 nos. 8.50 x 24” Three parted / Disc rims
Power Pack Air Compressor operated by diesel engine.
Brakes Wabco® or Knorr®(Germany) Twin line airbrakes, acting on all wheels with ‘S’ cam actuation.

-Two double acting diaphragm brake chambers on rear two axles.

-Service & Emergency Relay valves

-Automatic load sensing valve

-Air reservoir

– Manual parking brake

Landing gear Two speed mechanical Heavy duty landing legs. SAF (Sauer) / Equi.
King pin Jost / SAF (Germany) 3 ½” dia. to SAE standard,

Interchangeable to 2”

Electrics 7 way quick release connector, Pair of 24 volts rear light units,

comprising tail light, brake and signal lights fitted with high

intensity bulbs Aspock or equivalent.

– 7 nos. Side markers on either side.

-Registration plate lamps.

– Triangular reflectors at rear.

– Reverse light with horn.

– 1 No. Rotating Beacon

Painting System Surface treatment – Grit blasted to S.A.2.5 (Swedish std)

Internal : No coating

External: Two coats of epoxy primer and top

Coat of high gloss Polyurethane finish paint in single

colour. (Customer to Specify RAL Code).

Accessories – Mudguards with Rubber Mudflaps

– Winch type Spare wheel carrier- 1no.

– Reflecting sign at the rear (Yellow and Black)

– GI Grating Catwalk at full length at top and access ladder at rear.

– Fixed Side rail same height of ladder on side of walkway.

– Toolbox without tools.- 1no.

– Hoses – Nil. U Clamps for hoses will be provided.

 

Enquiry About this Product

Please fill the form below: