Flatbed 50Tons

Measurements
Volume:
50 Tons
Lenght:
13050 mm
Width:
2600 mm
Height:
3285 mm
Available Capacities: 30 | 50 Tons
Chassis Longitudinal members of Hot rolled/welded I beams of Grade ST 52-3 or equivalent. All

other pressed steel channels/plates of Grade ST 37-2 or equivalent.

Floor 4 mm chequered plate mounted on suitable cross members
Front Head Board 1500 mm Headboard fabricated from steel plate, corrugated with vertical supports/pillars and tarpaulin basket.
Axle 2 x 16 Tons Tandem bogie type axles.  BPW German or as per customer request.
Tyres 8+1 nos.12.00 R24” tyres
Rims 8+1 nos. 8.50 x 24” suitable rims
Brakes Twin line drum brakes, acting on all wheels with ‘S’ cam actuation.

– Two single acting diaphragm brake chambers per axle.

– Service & emergency relay valves.

– Automatic load sensing valve.

– Air reservoir

Landing Gear Two speed mechanical, telescopic type. SAF (SAUER) / EQUI
King Pin Jost/SAF 3.5” dia. to SAE standard interchangeable to 2”
Electrics 7 way quick release connector, Pair of 24 volts rear light units, each comprising tail light, brake and signal lights fitted with high intensity bulbs Aspock® or equivalent.

– 4 nos. side markers on either side.

– Registration plate lamps

– Reverse light with horn

– Revolving beacon

Painting System Surface treatment – Grit blasted to S.A.2.5

One coat of Zinc rich epoxy primer and top coat of High gloss Polyurethane

finish paint in single colour. (Paint – White)

Accessories – Mudguards with rubber mud flaps.

– Basket type spare wheel carrier.

– 1200 mm side stakes with pockets (8+8+2)

– Heavy duty rear bumper with reflecting stripes as per local requirements

– 1 no. tool box. (without tools)

– 5 nos. ratchet type lashing mechanism. (3+2)

– Provision for registration plate fixing.

– 8 nos. twist locks suitable for 2×20’ containers /1×40’ container.

– Access ladder at rear

– 1 no. water tank

– Side under run protection as per local requirements.

– 1 no.Fire extinguisher bracket.

 

Enquiry About this Product

Please fill the form below: